Cables & Adapters

Use this cable to connect a CAN-bus enabled battery, not from Victron, to a Victron system. There are two types, A and B. See the manual for detail...

The VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model.

Use this cable to connect the following products to the VE.Bus BMS: Skylla-TG all models Battery Protect models BP40i, BP60i and BP200i (all disc...

A cable to connect Digital Multi Control, Phoenix Inverter Control, Interface MK3-USB, VE.Bus connections between multiple VE.Bus devices and to ...

In the Orion-Tr Isolated DC-DC Chargers the remote on/off circuit is referenced to the primary battery (e.g. starter battery). The Orion-Tr DC-DC C...

VE.Bus to BMS 12-200 alternator control cable

The VE.Direct TX digital output cable can be used in combination with the BlueSolar and SmartSolar MPPT chargers.

When the CAN bus is not powered by a Skylla-I or an MPPT, use the VE.Can Power Cable to supply power.

Use this cable to remotely control BlueSolar and SmartSolar MPPT charge controller models. Note that it's not necessary to use this cable on the la...

Use this cable to connect the (discontinued) Phoenix Inverter 12/180, 24/180, 12/350 or 24/350 to a VE.Bus BMS or a BlueSolar MPPT Charger that fea...

This cable can be used to extend the BMS communication cables between a Lithium Battery Smart and the BMS. It ships in a bag of 2 pieces and is a...

The CANUSB interface is used to connect a VE.Can product to a computer.

This NMEA 2000 drop cable connects a VE.Bus product, for example a Multi or Quattro, to a NMEA 2000 network. It transmits monitoring information, A...

The MK3-USB allows the following products to connect to a computer for configuration and firmware updates: Multi, MultiGrid, MultiPlus, MultiPlus-I...

The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it...

RS232 to USB converter - This cable converts an RS232 to USB connection. VE.Direct to RS232 interface - This cable connects a Victron product with ...

The 2 meter extension cable is an accessory of the Blue Smart IP65 Battery Charger with DC connector. The quick disconnect on the end of the cable ...

The M6/M8 eyelet connector with fuse is an accessory for the Blue Smart IP65 Battery Charger with DC connector. The quick disconnect on the end of ...

Some of the USB plugs on our cables are too long to fit in the Wall mount box with a Color Control GX. Use this USB extension cable. Available in 0...